LCD Screen for I phone 6S
·Only compatible with iPhone 6S 4.7 inch-White/ Black.
·Any faulty screen can be replaced. (like display problems: cracked screens/touch Insensitivity /dead pixels lines appeared, wrong color issues)
·Sundry examination and tests before shipping, no worries about quality.
1 Front camera, Home button/ Earpiece/ Metal plate / screws are not provided and they are taken out from your old phone.
2 Professional technician is needed for installation(Or if you are the one who is the first time to experience it. Please read the instructions or scan the QR Code in the instructions to watch video for removing and installing.)
3 Please test all items before installation for the screen is easily broken,so carefulness is an indispensable part while installing.
4.If you meet any problems and questions please contact us as soon as possible, We are here to provide you the best service all the time.
·Quality guarantee: Each screen is tested one by one strictly, 100% in good working condition, well packaging, buy with confidence.
·We are care deeply about customer satisfaction. Fast shipping and with 60 days free warranty.24 hours email service
LCD Screen for I phone 6S
Qty per Carton
50cm * 40cm * 40cm
2~3 working days FOB SZ
Delivery & Payment:
FOB SZ / TT in advance
Step 1: Power off your iPhone and remove the two screws
Step 2: Using a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while continuing to pull up with the suction cup.
Step 3: Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.
Step 4: Remove the following 5 screws securing the front panel assembly cable bracket.and then use the flat end of a spudger to disconnect the home button cable connector,the display data cable connector.
Step 5: Remove the two Phillips screws securing the home button bracket.
Step 6: Remove the home button bracket from the fro
Step 1: Remove the home button bracket from the front panel.
Step 2: Use the point of a spudger to disconnect the home button cable connector by pushing it up and away from the home button.
Step 3: Use the point of a spudger to disconnect the home button cable connector by pushing it up and away from the home button.
Step 4: Gently push the top left corner of the home button up away from the front panel.
Step 5: Do not push the home button all the way through—you only need to get a corner free so that you can pry it free with a spudger.(This membrane is very thin. If you feel like you're going to tear the button, apply mild heat (with an iOpener, heat gun, or hair dryer) and try again.)
Step 6: Use the point of a spudger to carefully separate the home button cable from the adhesive securing it to the front panel.